Three important points needs to be done during the process of packing: (1)Clean the guitar and loosen the strings. (...
Every piece of guitars must be tested before packing. It needs to be sure that no frets buzzing, Reasonable distance between ...
1. Machine head installation 2. String installation Machine head installation and string installation is ...
Polish the bridge well before installation and should NOT be slanting when installing it. The most important thing is to ensu...
1. Base coat- Automatic electrostatic spraying. 2. Polish-Make the surface smooth. 3. Finishing coa...
1. Install the truss rod 2. Install the fingerboard: 3.Shave the neck to make it fit the fingerboard per...
This is the most important process in the whole guitar production. This process can effect the hand feeling, the tone and cho...
We have discussed about how to make the top and the sides. About making the back, it is similar to make the top(cut and then ...
1. Use mould to make one side: 2. Use another mould to make another side: 3.Joint the two sides together...
1. Laser cutting 2. Make the soundhole 3. Inset the rosette 4. Install the brace Bra...